RECLAME Coperta 1: S.C.Jura Comex; coperta 2: Eirich; coperta 3 - Heinirich Wagner Sinto Advertisings Maschinenfabrick GmbH; coperta 4:-Inductotherm. In interior: Anter; NPP- Tehnologia; AMCO-Otopeni

ANUNTURI: Jubileul revistei "Foundry Trade Journal" (3); simpozion Huttenes Albertus (7); Announcements calendar (8); conferinta Galati 2002 (11); simpozionul "Science and Proccesing of Cast Iron (11); firma Anter (22); carti noi intrate in biblioteca ATTR (35);carti de specialitate editate in Germania (35); Salonul turnatoriilor sub presiune (35); AMS 2002 (40); abonamente la Revista de Turnatorie (47); posibilitati de documantare (47); GIFA/NEWCAST 2003 (47); seminarul de la LIDICE (47); FOND-EX-BRNO 2002 (47); Targul de la KIELCE (47); revista Bibliotecika Liteiscika (47); recomandari pentru autori (48).

• G.Neagu, Fl.Stefanescu
  Dirijarea solidificarii aliajelor turnate prin utilizarea racitorilor tubulari
  Directional solidification of Cast Alloys by the use of tube coolers
• I.Riposan s.a
  Evaluarea materialelor de carburare pentru fonte
  Recarburizers evaluation for cast irons
• L.Sofroni
  Evenimente editoriale: trei carti ale autorilor Fl.Stefanescu, G.Neagu s.a
  Publishing events:three books of authors Fl. Stefanescu, G.Neagu s.a
• I.Riposan.
  Recomandari pentru realizarea Fgn de inalta plasticitate si tenacitate
  Recommendations to produce High Elongation/High Impact Grades of Ductile Irons
• G.Blann, G.Vander Voort.
  Pregatirea probelor acoperite prin pulverizare termica
  Preparation of metallographic samples by thermal atomization
• L.Sofroni.
  Recenzia cartii N.N.Kuzmin s.a
  Book rewue of authors N.N.Kuzmin, et.al.
• T.Dumitrescu.
  Un punct critic al fierului si al aliajelor sale. Punctul Sirovich
  A critic point of iron and its alloys. Point Sirovich
• I.Chira, Stela Ionita, N.Negoita.
  Determinari specifice pentru aprecierea calitatii apei
  Specific determinations to the evaluation of water quality
• C.Cosneanu.
  Folosirea in turnatorii a cuptoarelor electrice cu canal si a mixerelor dozatoare magnetodinamice
  The utilisation in foundries of the electrical furnace with channel and magneto-hidraulyc mixer
• A.Nofal.
  Contributii la obtinerea fontelor de inalta calitate
  Contributions to obtain high quality cast irons
• K.Pflanz, I.Lambadari s.a
  Turnrea fontei cu grafit nodular feritice in piese cu pereti subtiri la SC UPRUC TAP-SDV SA
  The foundry experience about the production of nodular cast iron by UPRUC TAP-SDV
• L.Sofroni, C.Onica
  Tendinte si realizari in domeniul productiei de piese turnte
  Trends and Achievements about Cast Products Manufacture
• *** AMCO OTOPENI-20 de ani in metalurgie
• AMCO OTOPENI-20 years in metallurgy
• L.Sofroni
  Revista revistelor
  The Magazine of all Magazines
• C.Cosneanu
  In memoriam: Ioan Simion Constantinescu
  In memoriam: Ioan Simion Constantinescu

ANUNTURI: Congresul Mondial din Coreea (9); Druckguss-Praxis: O noua revista (15); Conferinta Internationala de la Kiev (30), Bramat 2003 (33); Simpozionul de la Tarmaveni (33); Carti noi tiparite in Franta si Italia (35), Expozitia Turnarea sub Presiune-Paris (35), Carti noi intrate in biblioteca ATTR (48)

RECLAME: Coperta 1: Jura GmbH; Coperta 2; Eirich; Coperta 3: Heinrich Wagner Sinto Maschinenfabrick GmbH; Coperta 4: Inductotherm; in interior: Total Control SA, Carbid Fox, AMCO-Otopeni

Nr. 1 - 2001

• T. Skaland, S.Olsen
  Factorii care influenteaza gradul de asimilare si consumul de magneziu in procesul de nodulizre a fontei in oala
  The factors that influence the degree of assimilation and consumption of magnesium in the nodulisation process of cast iron in the ldle
• C.Bratu, L.Sofroni, L.Cotor
  Consideratii privind interctiunea dintre baia metalica si zidaria magnezio-carbonica la tratarea in vid a otelurilor
  Consideration of the interaction between the melt and magnesio-carbonic brick-work to the vacuum treatment of steel
• I.Chira
  Cadrul european legislativ si organizatoric in domeniul calitatii
  The european legislative and organisational background in the field of quality
• E.Cohn, C.Dumitru, M.Micut
  Consideratii privind utilizarea liantilor fosfatici la confectionarea formelor-coji cu modele usor fuzibile
  Consideration of using the phosphate binding materials to produce sheel mould with lot wax patterns
• I.Marginean, G.Matei
  Materiale precursoare carbonice pentru amestecurile de formare
  The carbonic forerunner materials for moulding materials
• L.Sofroni
  Tendinte si realizari in productia de piese turnate
  Tendencies and achievements in Casting Production
• O.Lixandra
  Materiale performante LAFARGE inlocuiesc materialele traditionale din turnatorii
  The performance LAFARGE materials that replace the traditional material from the foundries
• R.Iatan, I.Marginean, S.Radoi,
  Omogenitatea pieselor grele turnate din otel
  The homogeneity of steel heavy castings
• C.Bratu, L.Sofroni, M.Damian, L.Cotor
  Influenta siliciului si fosforului asupra proprietatilor fizico-mecanice ale otelului austenitic manganos
  The influence of Silicon and Phosphorus to the physic and chemical properties of manganese austenitic steel
• M.Vladoi
  Simularea proceselor metalurgice la elaborarea si turnarea aliajului aluminiu-magneziu, tip ATMg10
  The simulation of metallurgical process to the elaboration and casting of the aluminium-magnesium alloy type ATMg10
• C.Blann, G.Vander
  Concepte contemporane pentru pregatirea probei
  Contemporary Concepts about the preparation of Metallographic Samples
• A.Gheorghiu-Dobre
  In memoriam Prof.dr.ing.Aurel BERGHEZAN

RECLAME: LIXLAND S.A., EIRICH; HWS DE FIRME LAFARGE REFRACTORIES/ELKEM

top

Nr. 2 - 2001

• G.Neagu, F.Stefanescu
  Rafinarea otelurilor prin tratare cu gaze inerte si pulberi reactive
  Refining of steels by injection of inert gas and reactive powders
• A.Crisan
  Cercetari privind ameliorarea calitatii fontelor cu grafit lamelar, utilizate la turnarea discurilor de pilit bile pentru rulmenti
  Reasearch about improving the quality of lamellar-graphite cast irons used at casting bearing rolls
• B.Varga, I.Varga
  Calitatea lingourilor de AlMg6 in functie de diametrul lor
  The quality of AlMg6-alloys ingots according to the cooling rate
• G.Florea, B.Florea, D.Diaconu
  Caracterizarea tribologica a aliajelor Cu-Sn
  Tribologic characteristics of CuSn alloys
• L.Firescu, I.Surcel, M.Roman, N.Munteanu
  Indepartarea calciului si combaterea efectelor acestuia in aliajele de aluminiu
  Removing calcium and ammeliorating its effect in aluminium alloys
• A.Ciocan, N.Ciocan
  Contributii la realizarea elicelor navale din otel inoxidabil ferito-martensitic
  Contributions at manufacturing naval propeller made of ferrite-martensite stainless steel
• V.Duta
  Turnarea centrifugala-procedeu modern de obtinere a pieselor
  Centrifugal casting: modern technique for obtaining cast products
• I.Ciobanu
  Cercetari privind clasificarea retelelor de turnare
  Research about the classification of the casting runners
• I.Ciobanu
  Algoritm pentru dimensionarea retelelor de turnare
  Algorythm for determination the casting runners
• S.Munteanu
  Instalatie experimentala pentru turnarea continua orizontala, in camp electromagnetic, a aliajelor de aluminiu
  Experimental instalation for continous horizontal casting of Al-alloys in electromagnetic field
• C.Dumitru
  Impactul ecologic al folosirii rasinilor sintetice in amestecurile de formare
  Considerations about the environmental impact of the utilisation of synthetic resins
• G.Blann, G.Vander
  Concepte contemporane privind pregatirea probelor metalografice
  Contemporary concepts about metallographic sample preparation
• D.Ghitac
  Consideratii privind industria aurului din Romania
  Considerations about gold industry in Romania
• A.Chiriac, M.Vlad, F.Tudorie
  Unele aspecte privind aliajul Cu-Pb cu proprietati de antifrictiune
  Same aspects about Cu-Pb alloys with tribological properties
• L.Sofroni
  Tendinte si realizari in productia de piese turnate Trends and achievements in foundry manufacturing
• C.Alexandru
  In memoriam: Prof.dr.ing.Mihai Vida

RECLAME: LIXLAND S.A., EIRICH; HWS DE FIRME FOSECO-ROMANIA

top


• Nr. 3 - 2001
  
  • L.Sofroni, D.Dobrovici
    Profesorul Dumitru Briscan-100 ani de la nastere
    Prof.Dumitru Briscan - 100 years since his birth
  • S.Georgescu Gorjan
    Coloana infinita-scurta istorie Infinits
    Column-brief history
  • I.Tofan, Victoria Malihin
    Tehnologie si instalatie pentru introducerea aluminiului si silicocalciului in baia de otel
    Technology and installation for introducing aluminium and silico-calcium in the steel bath
  • D.Ciucescu s.a
    Particularitatile otelurilor dual-phase
    Particularities of the dual-phase steels
  • I.A.Bacanu, Elena Tiganila
    Posibilitati de utilizare a sistemului de liere cu autoantarire la rece (no bake) la diverse temperaturi
    Utilization possibilities of thes trengthening no-bake-binding system at various temperatures
  • G.Simionescu, R.Popovici, D.Ciucescu
    Utilizarea dolomitei ca fondant la elaborarea fontelor in cubilou
    Using dolomite as fluxing agent casting cast irons
  • E.Hausler
    FBO - O noua generatie de masini pentru forme fara rame Heinrich Wagner Sinto
    FBO - A new Generation of Heinrich Wagner Sinto forming frameless machines
  • T.Bedo, A.Constantinescu
    Cercetari referitoare la realizarea formelor de turnare prin procedeul air-shock
    Research about the manufactures of castings molds via air-shock process
  • V.Dijmarescu, Fl.Dragoi
    Calitatea bentonitelor de turnatorie
    The Quality of the Foundry Bentonites
  • S.Olsen, O.Lixandra. I.Riposan
    Recomandari pentru cresterea eficientei modificarii grafitizante a fontelor cenusii
    Recommendations to improve inoculation efficiency for grey irons
  • L.Sofroni
    Recenzie la cursul universitar privind protectia mediului-profesor C.Predescu
    University book of prof.C.Predescu
  • A.Crisan
    Conferinta internationala SOCAS-Brasov
    International Conference SOCAS-Brasov
  • N.Inoan, A.Ferro, G.Pricop, E.Bei, L.T.Rus, C.Apostoloiu, M.Chiliment
    Din activittea ocietatilor comerciale: NAI SRL, Metal Star, Besta Group SA, Bentonita SA, Bentoflux SA, Neferal SA, M.O.M. Tech SRL
    From the activity of the Commercial Companies: NAI SRL, Metal Star, Besta Group SA, Bentonita SA, Bentoflux SA, Neferal SA, M.O.M. Tech SRL
  • M.Hubert Protopopescu
    Max-Planck Institut fur Metalforschung-la a 80-a aniversare
    Max Planck Institut at its 80th anniversary
  • I.Riposan
    A XVI-a Conf. Nationala de Turnatorie
    The 16th Foundry National Conference in Romania
  • L.Sofroni
    Eveniment editorial: o noua carte a profesorului S.P.Dorosenco
    Editorial event: A new book of prof. S.P.Dorosenco
  • I.Riposan
    Actiuni ale Organizatiei Mondiale de Turnatorie
    Actions of World Foundry Organization
  • M.Vladoi
    Corelatia dintre parametrii terhnologici, proprietati si structura la aliajul ATMg10
    Correlation between technological parameters, properties and structure of ATMg10 alloy
  • Stela Ionita
    Perspective de utilizare a robotilor industriali in operatiile specifice tehnologiilor de turnare
    Utilization perspectives of industrial robots in the foundry technologies
  • C.Bratu
    In memoriam: Conf.dr.ing.Simion Cocolas
    In the Memory of Conf. S.Cocolas

  RECLAME: HUTTENES-ALBERTUS ROMANIA DE FIRME HWS; EIRICH; INDUCTOTHERM; TECHSERVICE; CARBID FOX

top

Nr. 4 - 2001

• C.Urbat
  Exigentele cu care se va confrunta productia de piese turnte din Europa in urmatorul deceniu
  Requirements confronting the European Foundry Industry in the Next Decade
• I.Riposan, M.Chisamera, S.Stan, S.Ignat, M.Bali
  Influenta calitatii carbidului industrial asupra capacitatii de desulfurare
  The Influence of Commercial Calcium Carbide Quality on its Desulphurization Capacity
• L.Cotor
  Influenta factorilor fizico-chimici si tehnologici asupra randamentului desulfurrii fontei lichide prin injectie de pulberi reactive
  The impact of the phyical-chemical and technological factors upon the efficiency of the hot metal desulphurization by the reactive powder injection
• I.Riposan, M.Chisamera, S.Stan, S.Ignat
  Evaluarea nivelului de interactiuni chimice cu captuseala acida, provocate de participarea CaC2/CaO la desulfurarea fontelor
  The assessment of chemical action level on the acid lining during CaC2/CaO desulphurization of iron melt in coreless induction furnaces
• F.Hourlier
  Elaborarea fontelor in cuptorul rotativ oxigaz
  The elaboration of cast irons in oxigaz rotative furnace
• Ana Josan
  Tehnologie experimentala de elaborare a otelului hipereutectoid
  Experimental technology of elaborating hipereutectoid steel to be used in roll casting
• Maria Stoicanescu, I.Giacomelli
  Influenta tratamentului termomagnetic asupra proprietatilor aliajelor de aluminiu plasticizabile si de turnare
  The influence of thermomagnetic treatment upon the properties of alluminium alloys
• Maria Baciu, D.Galusca,S.Stanciu, A.Alexandru, P.Baciu, I.Alexandru
  Influenta parametrilor tehnologici asupra structurii si duritatii fontelor albe aliate pentru bile de macinare
  The influence of technological parameters of elaboration and casting upon the structure and hardness of white alloyed cast irons for grinding balls
• H.Vermesan, G.Vermesan, G.Negrea
  Comportarea la tratamentul termic cu fascicul laser a fontelor cenusii
  Laser surface hardening behaviour of gray cast irons
• T.Rusu, Elena Simona Avram
  Cercetari asupra degradarii bentonitei pentru turnatorii
  Contributions to the research of heating behaviour of bentonites for foundry
• L.Sofroni
  Evenimente editoriale: cartile autorilor M.Taya si R.Arsenault; C.Dumiterscu si R.Saban
  Editorial events: M.Taya and R.Arsenault; C.Dumitrescu and R.Saban
• C.Balescu, V.Mirea, R.Margarit, C.Bulancea, P.Savum
  Folosirea unui sistem de informatizare integrat pentru determinarea unor proprietati specifice topiturilor metalurgice
  The utilization of an integrat informatics system for the determination of some properties specific to metallurgical melts
• P.Badiu
  Coloana timpului-joc cu infinitul, omagiu adus lui C.Brancusi si Coloanei
  The time Coulmn-the game with infinite, dedicated to Constantin Brancusi and his Column
• I.Riposan, S.Ignat
  Restructurarea industriei de turnatorie in Ungaria
  The restructuring of the Foundry Industry in Hungaria
• I.Chira, Stela Ionita, N.Negoita
  Model pentru elaborarea bilantului de mediu
  Model for drafting the environment documents
• Felicia Potincu, M.Chiliment
  Din activitatea societatilor comerciale: Hidromecanica si Omega
  From the activity of the commercial companies: Hidromecanica, Omega
• L.Sofroni, C.Onica
  Tendinte si realizari in domeniul productiei de piese turnate
  Trends and Achievements about Cast Products Manufacture
• *** ATTR felicita: Prof.Avram Nicolae, la 60 de ani; SC FAUR-SA, la 80 de ani; UCM Resita la 135 de ani; Universitatea "Eftimie Murgu" din Resita, la 35 de ani; Facultatea de Inginerie a Universitatii din Bacau, la 25 de ani.
  ATTR congratulations: Prof.Avram Nicolae on his 60th aniversary; the FAUR company at 80 years; UCM Resita company at 135 years; the University "Eftimie Murgu" of Resita at 35 years; Engineering Faculty of the Bacau University at 25 years

RECLAME: HUTTENES-ALBERTUS ROMANIA DE FIRME HWS; EIRICH; INDUCTOTHERM; RANCON; TOTAL CONTROL; OMEGA

top



INDEX 2000
Nr. 1 - 2000

• Chiorean S.
  Pledoarie pentru sectoarele calde din România
  Pleading for hot processes from Romania
• Sofroni L.
  Evenimente editoriale - o noua carte a profesorului Magnitzkii O.P
  Editorial Events - A new book of Prof. Magnitzkii O.P
• Olsen S.,Steen S.S., Kleivdal S.
  Dezvoltarea modificatorilor grafitizanti si a materialelor de carburare pentru tunatoriile de fonta
  Development of the inoculants and the carburization materials used in the iron foundry
• Nastase V., Adam N.
  Îmbunatiri tehnologice privind obtinerea de piese turnate din fonta cu grafit nodular si fonta cenusie pentru masini unelte
  Technological improvement about obtain of ductile and grey castings for machine tools
• Varga B.
  Germinarea omogena în topiturile metalice reale.
  Homogeneous germination into real metal melts.
• Iancau N., Simon S. s.a.
  Piese turnate centrifugal (I)
  Centrifugal castings
• Ptlanz K., Pojar E.L., Lambadarie I.
  Realizari în domeniul turnarii fontelor la SC UPRUC SA Fagaras
  Achievements into iron casting area at SC UPRUC SA Fagaras
• Popa A.
  Cercetari privind influenta unor parametri tehnologici ai procesului de turnare asupra proprietatilor aliajului turnat
  Researches regarding the infiuence of technological parameters of casting process on the cast alloy properties
• Sahli E., Munteanu A.
  Influenta alierii asupra cineticii transformarilor ce au loc la încalzire în structura fontelor cu grafit nodular calite
  The alloying infiuence on the transformation kinetic produced at heating into ductile iron structure
• Varga B.
  Încarcaturi metalice solide cu struc-turi îmbunatatite destinate elaborarii siluminurilor de turnatorie
  Solid metal lading with improvement structure intended for produce of foundry silumins
• Bedö T., Constantinescu A.
  Cercetari experimentale privind executarea formelor prin procedeul air- shock
  Experimental researches regarding rhe air-shock muulding process
• Bedö T.
  Modelarea matematica a procedeului de formare air-shock.
  Mathematical modelling of moulding process air-shock .
• Bratu C., Popa I.
  Determinarea coeficientului de solidificare prin modelare numerica
  Determining the solidification index through nume-rical modelling.
• Sofroni L.
  Scurte stiri
  Brief news
• Lixandra O.
  Materialele refractare si procesele metalurgice din agregatele de elaborare
  Refractory materials and metallur-gical process from furnace.
• Dragoi F., Codescu D., Corpadea V.
  Prepararea pe cale umeda a bentonitelor de turnatorie, o metoda de crestere a nivelului de calitate a productiei de piese turnate
  Prepare of foundry bentonite by moist way, a quality enhancement of the casting productio
• Riposan I., Bacanu I.A.
  A 15-a Conferinta Nalionala de Turnatorie - Bacau, 1999 (Adunarea 47 generala a ATTR)
  The 15-th National Foundry Confe-rence (November 3-S, 1999) General assembly of ATTR
top

Nr. 2 - 2000

• Popa L, Sofroni L., Bratu C.
  Cercetari privind dirijarea proceselor din zona bifazica în cazul lingourilor cave din otel
  Research concerning conduct of two-phase zone processes of the cave cast steel ingots
• Zirbo Gh., Piper N., Piper M.
  Turnarea continua cu solidificare sub menisc
  Continuous casting with under meniscus solidification process
• Chisamea M., Riposan I., Stan S., Ignat I.
  Influenta caracteristicilor fizico-chimice ale carburii de calciu tehnice asupra capacitatii sale desulfurante
  The infiuence of technical calcium carbide physical features on its desulphurizing capacity
• Cosneanu C., Ghiu M.
  Tehnologii moderne în productia de piese turnate
  Modern technologies in castings production
• Chira I.
  Elemente de tribologie si metalurgie mecanica specifica materialelor metalice turnate
  Wear resistance elements and mecha-nical metallurgy of cast metal materials
• Riposan I., Hoblea T., Adam N., s.a.
  Desulfurarea fontelor cu carbura de calciu în cuptoare cu inductie cu creuzet, acide în conditii industriale
  Calcium carbide irons desulphurization in acid induction fitrnaces with crucible in industrial conditions
• Vladoi M.
  Variatia marimii de graunte în aliajul ATMg10 elaborat în atmosfera si în vid
  The grain size variability in ATMglO alloy elaborated in vacuum and natural environment
• Camui C.
  Aliaj special înlocuitor al bronzurilor cu staniu
  Special alloy tin bronzes substitute.
• Dumitru C.
  Consideratii privind rolul pirocarbonului în procesul de umectare a formei de catre aliajul lichid
  Consideration regarding the pyrocarbon infiuence in liquid alloy - mould wetting process.
• Grolla H., Hausler E., Patzold W.
  HEINRICH WAGNER-SINTO GmbH EIRICH
  DCE NEOTECHNIK GmbH
• Prodan N
  Utilizarea unor produse metalurgice secundare în turnatorii
  Utilisation of secondary metallurgical products in foundry production.
top

Nr. 3 - 2000
• Sofroni L., Riposan I.
  Personalitati stiintifice românesti - Prof. dr.ing. Horia Colan - Prof.dr.ing. D.M. Stefanescu
  Romanian scientific personalities - Prof. dn ing. Horia Colan -Prof.dr.ing. D.M. Steanescu
• D.M. Stefanescu, T. S. Piwonka, S. R. Giese, s.a.
  Penetrarea aliajelor feroase în amestecurile de formare
  Penetration of liquid iron-base alloys in sand moulds
• Williams R., Morson D., Bond D., Horâcek M.
  Dezvoltari recente în turnarea de precizie si echipamente auxiliare din dotarea atelierelor de realizare a modelelor usor fuzibile din ceara
  Latest developments in waxes and ancillary equipment for waxroom
• Cosneanu C.
  Ingineria materialelor - Sectie în cadrul Academiei de Stiinte Tehnice din România
  Materials engineering - Department of the Romanian Academy of technical sciences.
• Chiorean H.
  Studii cu privire la contractia modelelor gazificabile din polistiren
  Studies concerning polystyrene patterns contrac-tion
• Ciobanu 1.
  Dimensionarea reatelor de turnare nepresurizate
  The dimensioning of the unpressure feeding systems.
• Nastac L.
  Modelarea numerica a morfologiei solidificarii si structurii de segregatie în aliajele cu cristalizare dendritica
  Numerical modelation of solidification structure and segregation pattern in dendritical alloys
• Sofroni L.
  Evenimente editoriale: Popescu V.I.; Hasse St.
  Editorial event: Popescu V.I; Hasse St
• George F., Vander Voort
  Tendinte în pregatirea probelor metalografice
  Trends in specimen preparation
• Marius Hubert- Protopopescu
  Cercetarea si proiectarea materialelor
  Research and design of Materials
• Pojar E. L.,Cerghizan V.
  Din activitatea societatilor comerciale
  From the company's activity
• Chiorean S.
  GIFA `99 - mereu în actualitate
  GIFA '99 Always in actuality
• Sofroni L.
  Progrese în industria de piese turnate
  Progresses in the casting industry
• Simionescu Gh., Cosneanu C.
  In Memoriam: Prof. dr. ing. Radu Popovici si Ing. Mircea Micu
  In Memoriam: Prof. dr. eng. Radu Popovici and eng. Mircea Micu
top

Nr. 4 - 2000

• Petrescu M.
  La centenarul nasterii academicia-nului Prof.dr.ing. Traian Negrescu
  To the Academician Prof. Dr eng. Traian Negrescu's birth centenary
• Cotor L., Petica E.
  Consideratii legate de asimilarea aluminiului la alijele de otel calmat tratate în vid
  Considerations referring to alluminiul asimilation in calm steel charges in vacuum treatment
• Stefanescu C1.
  Stadiul actual si perspectivele producerii de piese turnate din fonta cu pereti subtiri pentru industria de autovehicule
  The presently stage and thin walls iron castings perspective production for automotive industry
• Pana M.
  Tratamentul cu laser al suprafetei pieselor turnate din fonta cu grafit nodular
  The laser treatment of ductile iron casting's surfaces
• Sabanov B.B., Zadorojnîi V.I, Bogun O.P.
  Stabilirea tehnologiilor de tumare a pieselor unicat si de serie mica cu ajutorul calculatorului
  Single and small series casting's design with the computer help
• Munteanu S.I.
  Determinarea prin simulare pe calculator a profilului conului de solidificare la turnarea continua a aliajelor de aluminiu
  The computer simulation of the solidification con's shape by continuous casting of alluminium alloys
• Chiorean H.
  Studii privind microstructura granulelor si modelelor din polistiren
  Studies referring to the microstructure of polystirene granules and patterns
• Hohl B.
  Tehnica vidarii la prepararea amestecurilor de formare. Procedeul Eirich Evactherm
  Vacuum technology in moulding sand preparation. The Eirich Evactherm process Chitu Gh.
  Cercetari prospective asupra metalurgiei din România si la nivel mondial
  The prospective researches of Romanian and world-wide metallurgical industry
• Riposan I.
  Al 64-lea Congres Mondial de Turnatorie
  The 64-th World Foundry Congress
• Chiorean S.
  Paris - Expoziaia Fonderie 2000
  Paris- Fonderie Exposition 2000
• Sofroni L.
  Paris 2000 - Expoziaia mondiala de turnatorie
  Paris 2000 - World Foundry Exposition
• Bacanu I., Sofroni L.
  Fond-Ex 2000
  Fond-Ex 2000
• Sofroni L.
  Tendinte pe plan mondial în productia de piese turnate
  World-wide twndwncy in the foundy production
top




INDEX 1999
Nr. 1 - 1999

• Stefanescu F. si Neagu G.
  Alegerea metodei optime de dirijare a solidificarii in nodurile termice
  The choice of the optimal method for the directional solidification in the last solidification points
• Chira I.
  Metode de rafinare cu fluxuri - fondanti pe baza de deseuri de sticla
  Refinings methods with fusing agents glasses wastes on the basis
• Rusu T., Zirbo Gh., Dan F.
  Implementarea unui sistem pentru asigurarea calitatii - politica prioritara intr-un management performant
  A new system for quality assuarance in performant management
• Chiorean H.
  Studii cu privire la optimizarea procesului de expandare a granulelor de polistiren in presforme, folosind metoda autoclavei si cea a socului termic
  Investigations over expandations processings of polystiren grains in premould using autoclave method and thermic shock
• Vladoi M.
  !!! Evidentierea compusului intermetalic.........in aliaje aluminiu-magneziu prin difractometrie in raze X
  Evidence making of intermetalic compound ...........in aluminium-magnezium alloys through difractometry on X rays
• Crainic N., Cicola E., Ghita E.
  Strategia experimentelor factoriale aplicata la analiza amestecurilor de formare
  Strategy of factorial experiments with application in sand analysis
• Riposan I.
  ASIA - Industria de turnatorie in progres
  ASIA - Foundry in progress
• Sofroni L.
  Ereditatea structurala la aliaje
  Structural heredity at alloys
• Riposan I.
  Inlocuirea fontelor in turnatoriile americane
  Cast irons removing in american foundries
• Popa S., Silviu R.
  Maselotarea si alimentarea pieselor turnate din Fgn si Fe utilizand pachetul de programe METSOFT
  Running and feeding system for grei and ductile iron castings by using METSOFT
• ***
  Catedra Turnarea Metalelor - UPB - 30 de ani de activitate
  Metals Casting Department - UPB - 30 years of activity
• Lixandra O.
  Firme si tehnologii in productia de piese turnate
  Firms and technologies in castings production
• ***
  Manifestari tehnico-stiintifice internationale 1999
  International technical and scientifical meetings
• Sofroni L.
  Productia de piese turnate in unele tari din Europa si Asia
  Castings production in some countries from Europe and Asia
• Cosneanu C.
  In Memoriam: Dumitru Gheoca
  In Memoriam: Dumitru Gheoca
top

Nr. 2 - 1999

• Bratu C. si Popa I
  Proprietatile fizice si termofizice ale otelului austenitic manganos
  Physical and thermophysical properties of manganese steel
• Neagu G., Stefanescu Fl.
  Elemente tehnologice privind elaborarea si turnarea gravitationala a compozitelor de aluminiu cu particule
  Tehnological elements regarding the study and gravitational casting of aluminium composite
• Sofroni L., Camui C.
  Unele consideratii privind cvasiizotropia proprietatilor mecanice la piesele turnate
  Some considerations regarding the cvasiizotropy of castings mechanical properties
• Dumitru C.
  Posibilitati de marire a proportiei de pirocarbon in peretii formelor de turnare a aliajelorPossibilities of increasing the proportion of pyrocarbon in the casting mould
  Modern technologies in castings production
• Barca Fr., Paraschvescu G.
  Posibilitati de impregnare cu pirocarbon a electrozilor pentru cuptoare electrice cu arc
  Possibilities of pyrocarbon impregnation of electrodsfor arc electrical furnaces
• Chiorean H.
  Studii privind optimizarea procesului de preexpandare a granulelor de polistiren
  Studies regarding the optimisation of the pre-expansion process of the polystirene granules
• Sofroni L.
  Recenzie: Beh N.I. s.a. Lumea turnarii pieselor de arta. Istoria tehnologiei
  Editorial evem: beh N.I. and others.The World of art work casting. The history of technology
• Chira I.
  Specificatii de calitate in industria nationala de piese turnate
  Quality specifications of the national cast iron industry
• Chiorean S.
  Noi realizari in domeniul arzatoarelor industriale
  New achievements in the field of industrial burners
• Sofroni L.
  Noutati in productia de piese turnate (extrase din reviste de specialitate)
  Latest achievements in the cast iron industry production (abstracts from speciality publications)
• Riposan I.
  Informatii tehnice in fabricatia mondiala de piese turnate (extrase din reviste de specialitate)
  Technical information of the global production of the cast iron industry (abstracts from speciality publications)
• ***
  Productia mondiala de piese turnate in anul 1997
  Mondial cast iron production for 1997
• Hatara Gh., Rebrean S, Gergely S.
  SC ROMAN SA - Fonta cu grafit nodular - 50 de ani de experienta
  SC ROMAN SA - Ductil cast iron - 50 years of Experience
• Camui C.
  Fabrica de piese turnate si forjate a ELECTRO-PUTERE SA Craiova - 50 de ani de experienta
  Factory cast iron and forging Plant of ELECTRO-PUTERE SA Craiova - 50 years of Experience
• Protopopescu Hubert M.
  Fenomene deterministe si aleatoare in stiinta materialelor
  Determining and secondary phenomena in the materials science
• Cosneanu C.
  In memoriam: ing.Mircea Dragulin
  In memoriam: eng.Mircea Dragulin
• Chira I.
  Activitatea comisiilor internationale de specialitate in cadrul CIATF
  The activity of the International Speciality Committees within CIATF
top

Nr. 3 - 1999
• Henych I.
  Stadiul si posibilitatile de progres ale convertizorului folosit pentru modificarea fontelor cu magneziu metalic
  Stages and development outlook of converters used to modify iron with metallic magnesium
• Paradovschi C., Salistean D.
  Standarde revizuite in conformitate cu cerintele normelor europene si ale celor internationale
  Revision of Romanian Standards (STAS) in conformity with European Standards (EN) and International Standards (ISO)
• ***
  Anul 2000 - manifestari tehnico-stiintifice internationale
  Year 2000 - International technical and scientifical meetings
• Lixandra O., Riposan I.
  Feroaliaje granulate in apa - o noua generatie de materiale de aliere si de oxidare
  Ferro-aloys granulated in water - a new generation of materialls from alloying and deoxidation
• Dragoi F., Codescu D., Tudora M.
  Defecte de turnare specifice procedeului de formare la presiuni inalte
  Castings defects inherent to moulding processes at high pressure
• Bratu C.
  Evenimente editoriale
  Editorials events
• Dumitru C.
  Influenta proceselor de piroliza asupra intensitatii de desfasurare a transferului de caldura in sistemul metal-forma combinata
  The influence of the pyrolissis processes upon the imensity of the heat transfer in the metall-compound mould system
• ***
  Scurte stiri privind GIFA-1999, Dusseldorf
  Short news about GIFA-1999, Dusseldorf
• Rusu T.
  Imbunatatirea calitatii pieselor turnate prin impregnarea formelor
  Quality upgrades of iron castings through moulds impregnation
• Riposan I.
  Starea actuala si tendintele fabricatiei de piese turnate din Romania
  Present and future developments in the Romanian castings industry
• Chira I.
  Oportunitati si perspective ale restructurarii turnatoriilor in intreprinderi mici si mijlocii
  Opportunities to restructure small and medium sized foundry companies
• Riposan I., Bacanu I.
  GIFA '99 - important eveniment al industriei de turnatorie
  GIFA '99 - An important event in the castings industry
• Anitei M.
  SC ROBINETE INDUSTRIALE SA Bacau - 80 de ani de activitate
  SC ROBINETE INDUSTRIALE SA Bacau - 80 years of production
• Sofroni L.
  Noutati in domeniul productiei de piese turnate
  News from the castings industry
• Petru T.
  In Memoriam: Prof. dr. ing. Wanyorek Constantin
  In Memoriam: Prof. dr. eng. Wanyorek Constantin
top

Nr. 4 - 1999

• Jukovskii S.S.
  Procedee actuale de realizarea miezurilor si formelor din amestecuri cu lianti sintetici si intarire la rece (partea I)
  Modern technologies of producing cores and formswith cold chemical bounded sand (part I)
• Sofroni L., Dumitru C.
  Consideratii privind rolul structurii formelor combinate in procesul de interactiune metal-forma
  Consideration about tha importance of the structure of mixed forms, on the metal-form interaction
• Bacanu I.
  Unele consideratii privind calitatea pieselor turnate din fonta in forme cu modele gazeificabile
  Some consideration about the quality of iron castings, pored in forms with polystyrene models
• Sillen R.
  Controlul eficient al procesului de elaborare a fontei prin utilizarea analizei termice
  Utilizing advanced cooling curve analysis for efficient control of cast iron melting and treatment processes
• Riposan I., Chisamera M., Ignat S.
  Desulfurarea fontelor in turnatorii - posibilitati si necesitati
  The desulphurization of iron in foundries. Necessities and possibilities
• Bratu C, Sofroni L., Popa I.
  Proprietati termofizice ale feroaliajelor si prealiajelor destinate tratarii aliajelor feroase in stare lichida
  Thermophysical properties from ferro-alloys and master alloys intended for treatment of liquid iron alloys
• Sofroni L., Camui C.
  Cercetari privind influenta procedeului vibrarii aliajelor in timpul solidificarii asupra calitatii pieselor turnate
  Researches regarding the influence of the vibrating process, during the solidification, on the quality of castings
• Pana M., Anghelescu L.
  Modificarea aliajului de pistonare ATSi10Mg
  Modification of ATSi10Mg alloy for pistons
• ***
  HWS confirma prognozele din turnatorii
  HWS confirm the prognosis from foundries
• Chira I.
  Indicii de calitate ai pieselor turnate
  Castings quality indexes
• Prodan N.
  Tendinte pe plan mondial privind utilizarea prafului de cubilou (extrase din literatura de specialitate)
  Worldwide tendencies regarding the use of Cupola dust (abstracts from speciality publications)
• Sofroni L.
  Noutati tehnice. Extrase din literatura de specialitate
  Technical news. Abstracts from speciality publications
• Kennedy J.
  O victorie a muncii in echipa si a hotararii
  A victory of team work and determination
• Cosneanu c.
  In Memoriam: Dr. ing. Schonberger Francise
  In Memoriam: Dr. ing. Schonberger Francise
• Sofroni L.
  Evenimente editoriale
  Editorial events
top




INDEX 1998
Nr. 1 - 1998

• Riposan I.
  Foundry Automation - Echipamente de turnatorie performante. Simpozion ATTR - 21 noiembrie 1997, Brasov
  Foundry Automation - Foundry and Coreshop Machinery and Plants - ATTR Symposium (21.11.1997)
• Soporan V., Vamos C., Pavai C.
  Modelarea numerica cu rezolutie redusa a procesului de solidificare a pieselor de mari dimensiuni
  Numerical Modelling with Reduced Resolution of the Heavy Casting Solidification Process
• Riposan I.
  Recomandari "ELKEM" pentru alegerea si controlul compozitiei chimice a Fe si Fgn in marcile standardizate international
  ELKEM Recommendations in Order to Select and Control the Chemical Composition of grey and Ductile Irons ISO Grades
• Chira I.
  Certificarea calitatii in domeniul pieselor turnate
  Quality Certification in the Foundry Field
• Riposan I., Lixandra O.
  Cum pot fi limitate fisurarea, exfolierea si uzarea/eroziunea excesiva a captuselii cuptoarelor cu inductie cu creuzet
  How can be limited excessive cracks, flaking - peeling and wear - erosion of acid lining coreless induction furnaces - Lafarge Svenska Hoganas Recommendations
• Ciobanu I.
  Metoda de proiectare a retelei de turnare prevazute cu filtre pe canalul de distributie
  Design Method of Ingate System with Filter
• Taru L.
  Optimizarea unei tehnologii de turnare folosind simularea numerica prin metoda diferentelor finite
  Casting Technology Optimization by the use of Finite Difference Numerical Simulation Method
• Rodina v.
  Sistem de filtrare a incluziunilor nemetalice din aliajele de turnare
  Filtration system of the nonmetallin inclusion in the mould
• Pana Mihaela
  Activitatea de documentare si informare in domeniul turnatoriei prin intermediul BNT-ului
  Reference material and information activities in the foundry field
• Riposan I.
  ARABCAST '97 - Turnatoriile din lumea araba
  ARABCAST '97 - Foundries in the Arabian World
• ***
  Conferinta Internationala din China in domeniul turnarii aliajelor neferoase
  Non-ferrous and Special Casting '98 - International Conference and Exhibition '98 - 28-3110.1998, Shanghai, R.P.China
• ***
  Targul International de Metale din Republica Ceha
  7th International Trade Fair of Metals, Metallurgical Industry and Metal Casting, Ostrava, Rep.Ceha, 12-14.05.1998
• ***
  Conferinta Balcanica de Metalurgie - 4-5 decembrie 1997, Sinaia
  Balkan Matallurgical Conference - Sinaia, December 1997
• ***
  Invitatie la al 63-lea CIT - Congresul International de Turnatorie, 12/18 10 1998, Budapesta
  63rd World Foundry Congress (Budapest, Sept.1998) - Invitation
• ***
  In atentia autorilor
  In the attention of the Authors
• ***
  Calendarul manifestarilor tehnice de turnatorie cu participare internationala - 1998-1999
  International Foundry Events - 1998/1999
top

Nr. 2 - 1998

• Graf H.P., Kunze U.
  Aspecte ecologice legate de functionarea unei Turnatorii Model=TM
  Environmental protection in a Model Foundry=MF
• Tautan L.
  Armatura S.A. Cluj-Napoca - Un secol de experienta si traditie
  Armatura S.A. Cluj-Napoca - A century of experience and tradition
• Ciobanu I.
  Importanta determinarii rezistentei la tractiune a amestecurilor de formare
  The importance of the tensile strength determination of the mould sands
• ***
  Organizatii Europene de Turnatorie
  The European Foundry Organizations
• Chira I.
  Manualul Calitatii
  The Quality Book
• ***
  Invitatie la Forumul International Tehnologic - Germania, 1999
  Technology Forum International, Germany, 1999 - Invitation
• Riposan I.
  Fgn - Aniversarea a 50 de ani de existenta
  Ductile iron - 50th years anniversary
• ***
  ELKEM - Lider mondial in modificarea fontelor; Simpozion ELKEM
  ELKEM - World leader in cast irons modification; ELKEM Symposium
• ***
  Modificatori, materiale si tehnologii Fgn - Simpozion SKW
  Inoculants, materials and nodular cast irons technology - SKW Symposium
• ***
  In atentia autorilor materialelor din R.T.
  In the attention of the Authors
• Chira I.
  Evenimente editoriale - Vitrina cu carti
  News - Foundry Literature
• ***
  Invitatie la al 63-lea Congres Mondial de Turnatorie, 12-15 septembrie 1998, Budapesta
  63th World Foundry Congress (Budapest, sept.1998) - Invitation
• Riposan I.
  Informatii tehnice - Sectoare Elaborare
  The Technical information - The Melting sectors
• ***
  Invitatie simpozion: Utilaje si echipamente pentru Turnatorii ICE/AMAFOND Italia
  Foundry equipments ICE/AMAFOND Italy, Symposium - Invitation
• Sabau T., Gh.Istrate
  Defecte de turnare cauzate de calitatea necorespunzatoare a materialelor de formare
  casting faults due to the quality of moulding materials
• ***
  Invitatie actiuni ATTR - 1998
  ATTR actions 1998 - Invitation
• ***
  Limitarea patrunderii metalului si depunerii zgurei pe captuseala acida a cuptoarelor cu inductie cu creuzet
  Metal penetration and slag build-up restriction on the acid lining of the crucible induction furnaces
• ***
  Comitetul International al Asociatiilor Tehnice de Turnatorie (CIATF)
  The International Committee of Technical Association for Foundry
top

Nr. 3 - 1998
• Exner M.
  HEINRICH WAGNER SINTO in Romania
  HEINRICH WAGNER SINTO in Romania
• Rusu T.
  Unele aspecte privind igiena si securitatea muncii in turnatorii
  Some aspects regarding hygiene and working security in foundries
• ***
  Invitatie la Forumul International Tehnologic - Germania 1999
  Technology Forum International, Germany, 1999 - Invitation
• Soporan V. s.a.
  Modelarea numerica a fenomenelor hidraulice si termice la solidificarea aliajelor
  Numeric modelation of hydraulic and thermic phenomenon which exists at the solidification of the alloys
• ***
  Brosuri de informare tehnica
  Technical information booklet
• Chira I.
  Utilaje si echipamente pentru Turnatorii - ICE/AMAFOND Italia
  Equipments for Foundry - ICE/AMAFOND Italy
• ***
  Lucrari FIM/T
  FIM/T Papers
• Riposan I.
  Succesul si costul efectiv al folosirii nisipului legat chimic
  Succesful and Cost Effective Operation of a Chemical Sand System
• ***
  Lucrari FIM/T
  FIM/T Papers
• Sabau T.
  Procedeul RAPID PROTOTYPING de realizare a modelelor de turnatorie
  RAPID PROTOTYPING Process for obtain foundry patterns
• Chira I.
  Elaborarea lucrarilor stiintifice fundamentale universitarului. Lucrarea pilot a colectiei FIM/T
  Scientific papers making. The Base of University Professor. Pilot paper of FIM/T Collection
• Tarcomnicu R., Taru L.
  Proiectarea asistata pe calculator in turnatorie
  Design assisted by Computer in Foundries
• ***
  In atentia autorilor materialelor din R.T.
  In the attention of the Authors
• Chira I.
  Eficienta economica in domeniul pieselor turnate
  Economic efficiency in the castings field
• Vladoi M.
  Aspecte macro si microstructurale ale coroziunii aliajului ATMg10
  Macro and microstructure aspects of ATMg10 alloy corrosion
• Riposan I.
  Informatii tehnice din sectoarele de elaborare
  Technical information from melting range
• Lambadarie I.
  Oteluri si fonte inalt aliate turnate in piese
  Castings from high alloyed Steels and Cast Irons
• ***
  Revista REVISTELOR cu profil de Turnatorie (Lileinoe Proidzvodstvo, Slevarcnstvi, Giesserei)
  Selections from Contents of Foundry Review
top

Nr. 4 - 1998

• Cosneanu C.
  O viata pentru o profesie: Prof.dr.ing.L.Sofroni
  A life for a profession
• Riposan I.
  Cronica celui de al 63-lea Congres Mondial de Turnatorie, Budapesta, 12-06.09.1998
  Congress News 63rd World Foundry Congress - WFC
• Kuhlgatz W.
  Locul si rolul productiei de piese turnate in economia mondiala
  The position of the castings production in the world economy
• Sandor J., Havasi L.
  Situatia actuala si tendintele industriei de turnatorie din Ungaria
  State of the art and tendency of the in the Hungarian Foundry Industry
• Bacanu I.A.
  Cea mai buna lucrare tehnico-stiintifica prezentata la cel de al 63-lea Congres Mondial de Turnatorie
  The Best Technical Paper Award - 63rd World Foundry Congress
• Calamari G., Lixandra O.
  De ce modernizarea cuptoarelor cu inductie cu creuzet in turnatoriile de fonta si otel
  Why the modernization of coreless induction furnaces in the cast iron and steel fondries ?
• ***
  Invitatie la Forumul International Tehnologic (GIFA) Dusseldorf, Germania, 1999
  Technology Forum International, Dusseldorf, Germany, 1999 - Invitation
• ***
  Invitatie la CIATF Technical Forum 1999
  CIATF Technical Forum 1999 - Invitation
• ***
  Invitatie la EUROMAT '99 din 27-30.09.1999 - Munchen, Germania, 1999
  EUROMAT '99 (European Congress and Exhibition on Advanced Materiald and Processes), 27-30.09.1999, Munchen, Germania - Invitation
• ***
  In atentia autorilor materialelor din R.T.
  In the attention of the Authors
• Rusu T., Zirbo Gh.
  Rolul si importanta certificarii calitatii pieselor turnate in conformitate cu normele ISO 9000
  A new system for QUALITY assurance in performant management - ISO 9000 norms
• Sofroni L.
  Recenzie de carte: Nikitin N.I. Ereditatea la aliajele turnate. Edit. Masghiz, Samara, 1995
  The review of the book of Prof. Nikitin N.I.
• Chira I.
  Norme metodologice de realizare a AUDIT-ului
  Methodologic normsto achieve AUDIT
• Ciobanu I.
  Rezistenta dinamica la socuri a amestecurilor de formare
  The Dynamic shock resistance on mould sands
• Riposan I.
  Probleme actuale in producerea fontelor de calitate
  Actual problems in the high quality cast iron production
• Sabau T., Istrate Gh., Dragulenescu Elena
  Defectele pieselor turnate la care ponderea cauzelor aparitiei este data de forma constructiva a pieselor
  Ccasting Defects due to Geometrical Design
• Chira I.
  Eficienta economica a cercetarii stiintifice in metalurgie/turnatorie
  Economic efficiency of Scientific Examination in Metalurgy/Foundry
• Dragulenescu Elena s.a.
  Colaborarea constructor-designer-tehnolog metalurg la proiectarea pieselor turnate din fonta cu grafit nodular
  The cooperation between Builder, Designer and Metallurgic Technician at the design of casted ports from Nodular Graphite Cast Iron
• Chiculita I., Paradovschi C., Popa I.
  Tehnologie ecologica de degajare a aliajelor de aluminiu turnate in piese
  Ecological Degassing Technology for Foundry Aluminium Alloys
• Holmgren M.
  Reciclarea deseurilor din turnatorii
  Recycling of Waste in Foundries
• ***
  Lucrari ale colectiei Fundamentele Inginerului Metalurg/Turnator (FIM/T)
  The scientific papers of FIM/T Collection
top